This DIY turned out so good! I spent less than $20 to update our Kitchenaid mixer. And it still works! 🙌🏾 I added the simple steps below but head over to my blog linked in my below for more details! - Thoroughly wipe down and clean the mixer - Remove the back part and cover the any areas you don’t want painted with painters tape - Lightly sand gloss off of the mixer and wipe away all of the debris left on the mixer from sanding - Spray thin coats of spray paint to cover the mixer and decrease drips, wait at least 10 minutes between each coat (waiting is optional but recommended) - Let dry, then add a then coat of a high gloss top coat clear spray paint to protect the paint from chipping - Allow to dry at least 24 hours before touching it and it’s recommended to wait a week (so it fully cures/dries) before use https://greenssweethome.com/2022/10/11/kitchenaid-mixer-makeover/ LTKHome