Wireless Sconce DIY 🤍 Sharing all the battery-operated sconces I use throughout my home, plus the exact tools and anchors that make this install super simple. How I installed them: • Measure from the floor up and mark the same height on both sides (I like 60–65"). • Measure from a center point (bed/mirror/wall edge) so spacing matches. • Use a level to keep everything straight. • Hold the sconce in place and mark screw holes. • Drill pilot holes using a 3/16" drill bit for drywall anchors (or check the anchor package for the correct size). • Add anchors if needed and screw the sconce base into the wall. • Insert battery puck light/bulb and turn on. No wiring, no electrician, and it takes about 15–20 minutes for a high-end look.