SAVE FOR LATER! 💥I built an outdoor sofa!💪🏼💥 Details of this build below 👇🏻 This might be my favorite project to date, turning a stack of wood into a piece of something we will use for the foreseeable future is amazing! This entire set was built out of pressure treated 2x4’s! The measurements below were based off of my cushions, which were 25x25 for the base cushions. * 11 cut at 72” these are for the from and back parts of the couch * 4 cut at 30” for the top and bottom rail of the side arms * 6 cut at 27” for the inside rails of the side arms * 4 cut at 24” for the front and back of the side arms * 2 cut at 25.5” these were used for the inside slats of the base, where the seat cushions sit. This was definitley easier to build with another person to hold some of the boards in place, but for the most part you can do this solo! It definitely be built in a day, and with a standard chop saw! ibuiltthis girlswithtools girlswhobuild outdoordesignoutdoordecor woodworking diyhomeprojectsdiyhomeimprovement diyhomedecor homerenovationoutdoorrenovation LTKSummerEdit LTKHome LTKSaleAlert